News

Company News

Industry News

Lift noise is too big reasons and solutions

Release Time:

Mar 04,2024

If you experience too much noise when using a lift, it is important to take prompt action to resolve the situation, as it is usually more dangerous and will have a greater impact on normal work if left untreated for a long period of time.

Lift noise is too big reasons and solutions

If you experience too much noise when using a lift, it is important to take prompt action to resolve the situation, as it is usually more dangerous and will have a greater impact on normal work if left untreated for a long period of time.

The following article is a specific introduction:

Analysis of the reasons for the noise of the lift pump station;

1. motor damage, replace the motor. 　　

2. overload load, relief valve overflow. 　　

3. reduce the load or. There is not enough hydraulic oil in the tank. Gear pump sucks in air and add enough hydraulic oil to the tank. 　　

Solution for the noisy lift pump station;

1.Damaged motor, replace the motor. 　　

2. Oil inlet filter is clogged, replace the coupling and clean the oil inlet filter. 　　

3. load overload, relief valve overflow, load release or increased relief valve set pressure (after manufacturer's approval).

4. Insufficient hydraulic fluid in tank. Gear pump sucks in air and adds enough hydraulic fluid to the tank. 　　

5. The relief valve is damaged. Replace it. 　　

6. If the hydraulic oil is deteriorated or unclean, replace the hydraulic oil and clean the inlet filter and tank. 　　

7. The gear pump is damaged. Replace the gear pump.